Hydraulic Cylinder

SOM ENERGY RESOURCES PVT LTD is certified for ISO 9001:2015, Management System Certificate.

S Series

Capacity:- 10-200 ton
Stroke:- 25-150mm
Maximum Operating Pressure: 700 bar

Model S :

Single Acting General Cylinder

Description:

Designed for use in all positions. Hard chrome plated plunger and inner of barrel resists wear and corrosion, it also be more closed and extending cylinder life. Maximum sized springs speed piston return and increase spring life. Special soft ring reduces wear caused by off-center loads. Plunger wiper reduces contaminant. Stop ring for piston blow-out protection. Powder coat finish for increased corrosion resistance and antirust. All cylinders are equipped with SQB-3/8UF female coupler & dust cap.

CSLP Series

Capacity:- 60-520 ton
Stroke:- 45-50mm
Maximum Operating Pressure: 700 bar

Model CSLP :

Single Acting Lock Nut Cylinder Load Return

Description:

Low height design for use in confined space. Special coating on thread piston and lock ring to prevent anti-seize over long period of time. Safety lock ring for mechanical load support even with hydraulic pressure released. Equipped with tilt saddle to minimize off center-load. Equipped with overflow port to prevent over stroke. Equipped with red indicate line to warn operator when cylinder reach full stroke. Load return type-for vertical lifting only. Powder coat finish for better corrosion resistance. ※All cylinders are equipped with SQB-3/8UF female coupler & dust cap.

RSCS Series

Capacity:- 10-90 ton
Stroke:- 38-62mm
Maximum Operating Pressure: 700 bar

Model RSCS :

Single Acting Low Height Cylinder

Description:

Light weight, low profile design for use in confined spaces, but stroke higher than RSSM. Grooved plunger end with threaded holes for mounting tilt saddles. SQB-3/8UF coupler and dust cap included on all models. Chrome plated plunger and inner of barrel resists wear and corrosion. Maximum sized springs speed piston return and increase spring life. Plunger wiper reduces contaminant. Stop ring for piston blow-out protection. Powder coat finish for increased corrosion resistance and antirust.

RSC Series

Capacity:- 5-100 ton
Stroke:- 16-362mm
Maximum Operating Pressure: 700 bar

Model RSC :

Single Acting, Collar thread Cylinder

Description:

Equip with collar thread and base holes (on most model), for greater flexibility in mounting onto fixture.(see page 16 for details) Equip with inner plunger thread (5 ton to 30 ton) for greater flexibility in designing fixture. Bronze alloy bearing on plunger to minimize scoring due to off-centre load. Hard chrome plated plunger to resists wear and corrosion. Inner barrel wall are hard chrome plated to resists wear and corrosion in high humidity atmosphere. Equip with wiper seals to prevent ingress of dirt. Equip with stop-ring to prevent plunger blow-out and withstands full "Dead-End" load. Powder coated finish for greater corrosion protection. Equip with plastic cap to protect collar threads. Come with SQB-3/8UF female coupler & dust cap.

RSSM Series

Capacity:- 5-150 ton
Stroke:- 16-16mm
Maximum Operating Pressure: 700 bar

Model RSSM :

Single Acting Low Height Flat Cylinder

Description:

Compact and flat design for use where in a narrow space. Mounting holes permit easy featuring. Grooved plunger ends require no saddle. Hard chrome plated plunger and inner of barrel resists wear and corrosion. Maximum sized springs speed piston return and increase spring life. Plunger wiper reduces contaminant. Stop ring for piston blow-out protection. Powder coat finish for increased corrosion resistance and antirust. Come with SQB-3/8UF female coupler & dust cap. Various height magnetic adapters. Perfect for low clearance areas needing a little height boost.

RSSM Series

Capacity:- 50-1,000 ton
Stroke:- 50-300mm
Maximum Operating Pressure: 700 bar

Model CSLL :

Single Acting, Lock Nut Cylinder Load Return

Description:

Hard chrome plated inner of barrel resists wear and corrosion. Safety lock nut for mechanical load holding. Interchangeable, hardened grooved saddles are standard. Single-acting load return. Overflow port functions as a stroke limiter. Special coating on piston and lock nut improves corrosion and abrasion resistance. Powder coat finish for increased corrosion resistance and antirust. Come with SQB-3/8UF female coupler & dust cap.